Open the panel by gently pulling back on the button on the top of the carry handle. This will release the
catch holding the two halves together. Open the panel and pull out both support legs at the rear of each
panel .Position the panel in the optimum position. In the lower right corner of the fold up solar panel, you
will see the word output. Remove the rubber protection cap (C) to expose the socket. Now take the pin end
of the selected cable that is connected to the battery and carefully insert into the output socket.
Note – Although the voltage is relatively low ,it is still recommended that the plastic insulation around the
pin is handled, rather than the metal pin itself.
If the pin has been inserted to the panel correctly and if the other and has been connected to a battery that
can receive power, then the charging indicator (D) will glow green. This confirms that the fold up solar
panel is delivering power to the battery.
Warning
1.
Keep the fold up solar panel away from fire to ensure damage and injury do not occur.
2.
Any severe shock or impact may result in damage and will void the warranty.
3.
Do not dismantle the fold up solar panel, in doing so will void the warranty.
