PowerTech PTRV- 8 KSI Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 51

background image

FORWARD

You are now the proud owner of a Power Technology Generator powered by a Kubota engine.

This engine is a product of Kubota’s quality engineering and manufacturing. The engine is made
with fine materials and manufactured under the strictest quality control standards and will assure you long
satisfactory service. To obtain the best use of your engine, please read this manual carefully. It will help you
become familiar with the operation of the engine and contains many helpful hints regarding engine
maintenance. Continuing improvements and advancements in product design may have caused changes to
your engine, which are not included in this manual.

Please contact Power Technology’s Customer Service Department for latest information on your Kubota

engine or for the number of your local Kubota dealer.

TO OUR CUSTOMERS

Thank you for your purchase of a Power Technology Generator. The information contained in this

manual applies to PTRV-8 KSI, PTRV-10 KSI and PTRV-12 KSI generators. In the event you experience a
problem with your generator please contact the sales dealer, one of our authorized service centers or Power
Technology’s Customer Service Department directly at 1-800-760-0027 from 8:00 a.m. to 5:00 p.m. EST.
Please have the generator model and serial numbers available when you call. This will help expedite service
and parts to you. Parts may be obtained directly through Power Technology and shipped the same day if
ordered by 3:00 p.m. EST. If required, a Major Service Manual may be ordered through Power
Technology’s Customer Service Department.

Generator Model Number____________________________________________

Generator Serial Number_____________________________________________

POWER TECHNOLOGY SOUTHEAST, INC.

634 STATE RD. 44

LEESBURG, FL. 34748-8103

(352) 365-2777

FAX (352) 787-5545

www.PowerTech-Gen.com

«
1
2
3
4
...
»

Содержание PTRV- 8 KSI




















































Отзывы:

Нет отзывов

Похожие инструкции для PTRV- 8 KSI

Бренд: Mase Generators Страницы: 92

TransSteel 2200

Бренд: Fronius Страницы: 136

Бренд: K&S BASIC Страницы: 23

Бренд: Durabrand Страницы: 28

SKYLINE HFP3000

Бренд: INE Страницы: 96

MSX+ 152/120 48F SBM-485

Бренд: phytron Страницы: 66

Бренд: Roberts Страницы: 24

DIGITRADIO 230 OD

Бренд: TechniSat Страницы: 644

Бренд: Johnson Controls Страницы: 8

Бренд: Alinco Страницы: 32

Бренд: Teledyne Страницы: 126

Tiptop Audio Eurorack 200 Series

Бренд: Buchla Страницы: 2

Бренд: Buffalo Tools Страницы: 29

Бренд: Buffalo Tools Страницы: 33

Бренд: Roadstar Страницы: 11

Бренд: Chicago Electric Страницы: 27

Бренд: Tronsmart Страницы: 18

Бренд: PeakTech Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды