background image

2.1.4 PEDESTRIAN MODE ADJUSTMENT (DIP 7.P MODE)

ON: Press button B on the remote to operate to pedestrian mode by open single gate to 45 degree
OFF: The pedestrian mode is disabled. Single gate will fully open and close

2.1.5 FLASHING LIGHT ADJUSTMENT (DIP 8.LIGHT)

ON: The flashing light blinks for 3 seconds before the gate moves, and blinks simultaneously during the movement.
OFF: The flashing light blinks and the gate moves simultaneously.

1. SW2_2, SW2_1: OFF OFF

Type of Safety Device

FULLY CLOSED
FULLY OPENED
STOP DURING MOVING
CLOSING
OPENING

Safety Device2 :
Photocell-OPEN

Open not allowed

No effect

Open not allowed

No effect

Close

Safety Device1 : 

Photocell-CLOSE

No effect

Reload automatic closing time
Reload automatic closing time

Open

No effect

Position of Gate 

                                       When safety devices are activated

2. SW2_2, SW2_1: OFF ON

Type of Safety Device

FULLY CLOSED
FULLY OPENED
STOP DURING MOVING
CLOSING
OPENING

Safety Device2 :

Safety Edge

Open not allowed

Locks

Reverse to open for 2 seconds

Reverse to clsoe for 2 seconds

Reload automatic closing time

Safety Device1 : 

Photocell-CLOSE

No effect

Reload automatic closing time

Open

No effect

Position of Gate 

                                       When safety devices are activated

3. SW2_2, SW2_1: ON OFF

Type of Safety Device

FULLY CLOSED
FULLY OPENED
STOP DURING MOVING
CLOSING
OPENING

Safety Device2 :

Opening Device

Open

Open
Open

No effect

Reload automatic closing time

Safety Device1 : 

Photocell-CLOSE

No effect

Reload automatic closing time

Open

No effect

Position of Gate 

                                       When safety devices are activated

4. SW2_2, SW2_1: ON ON

Type of Safety Device

FULLY CLOSED
FULLY OPENED
STOP DURING MOVING
CLOSING
OPENING

Safety Device2 :

Photocell-OPEN/CLOSE

Open not allowed

Locks

Stop
Stop

Close not allowed, Open for 2 seconds when auto closing is ON

Safety Device1 : 

Photocell-CLOSE

No effect

Close not allowed

Open

No effect

Position of Gate 

                                       When safety devices are activated

2.2.1 PHOTOCELL ADJUSTMENT (DIP 1.PHOTO1, DIP 2.PHOTO2)

2.2 SW2 DIP SWITCH SETTING

CONTROL BOX

4

Содержание PC170













Отзывы: