PowerTec MT4009, Руководство пользователя

Страница: 5 / 12

3
ASSEMBLY
ASSEMBLY
3
Attach the Footrest and Feet
Refer to Figure 4–5
• Slide the footrest onto the main frame and secure with
four button head screws and four hex locking nuts (two
on each side).
• Screw the feet into the footrest as shown in Figure 5.
The adjustable nut on the feet can be used to level and
adjust the height of the stand.
Main Frame
Figure 4
Footrest
Button Head
Screws
Hex
Locking
Nuts
Foot
Figure 5
Footrest
Adjustment
Nut
Attach the Wheels
Refer to Figure 6
• Orient the wheel with the raised hub next to the main
frame. Place a flat washer onto the wheel bolt, slide the
wheel bolt through the wheel and another flat washer (a
washer should be on each side of the wheel) and then
thread the wheel bolt through the threaded boss on the
main frame. Make sure the wheel turns freely and then
secure with hex locking nut. DO NOT over tighten, if too
tight the wheel will not turn.
• Repeat with other wheel.
Figure 6
Wheel
Wheel Bolt
Hex
Locking
Nut
Raised Hub
Main Frame
Flat
Washer
Flat
Washer
Attach the Handle
Refer to Figure 7
• Slide the handle onto the main frame and secure with
four button head screws and four hex locking nuts (two
on each side).
Figure 7
Main Frame
Handle
Hex Locking Nuts
Button Head
Screws