Voltage...........................................................................120
Amps................................................................................12
Hertz................................................................................60
Phase.........................................................................Single
Cutter Head Speed..........................................10,000 RPM
Table Size.......................28-1/2 x 6-1/4 in (72.4 x 15.9 cm)
Blade Width................................................6-1/8” (15.6 cm)
Maximum Depth of Cut.....................................1/8” (3 mm)
Cuts per Minute.........................................................20,000
Dust Collection Port.....................................2-1/2” (62 mm)
TABLE OF CONTENTS
PRODUCTION
SPECIFICATIONS
SAFETY RULES
1
Work Preparation
Work Area Preparation
Tool Maintenance
Tool Operation
ASSEMBLY
2
Unpackaging
Attach Fence Support
Install Fence
Attach Dust Collection Bag
Mount Jointer
Power Source
Grounding Instructions
Extension Cords
Motor
Electrical Connections
OPERATION
6
Description
Specifications
Safety Precautions
Position Fence
Check Blade Outfeed Table Alignment
Adjust the Height of the Cutterhead Blades
Adjust the Depth of Cut
Measure the Depth of Cut
Check the Blade Guard
On-Off Switch
Feed Direction
Feed the Workpiece
Use Hold Down/Push Blocks
Bevel and Chamfer
MAINTENANCE
10
Replace the Blades
Sharpening the Blades
Replace the Fan Belt
Replace the Drive Belt
Inspect and Replace Motor Brushes
General Maintenance and Lubrication
Keep Tool in Repair
TROUBLESHOOTING
12
PARTS ILLUSTRATION & 13
LIST
WARRANTY
15
SECTION
PAGE
