FEATURES & SPECIFICATIONS
•Powerful CREE XM-L2 U2 LED produces 600 Lumens
(with a 4.2V RCR123A rechargeable battery) at the
brightest setting including strobe.
• 172 meters of throw with impressive flood to also light
up close areas.
• Includes one 700mAh RCR123A 4.2V (16340)
rechargeable lithium-ion battery. A full charge will
provide 132 hours of constant runtime on the lowest
setting.
• Has a strong magnetic tail cap that can mount onto
metallic surfaces to illuminate your work area.
• Built in pocket clip that can be used on the bill of a
baseball cap. It can also be used as a headlamp.
• Advance digital circuit control technology to maximize
battery life and provide consistent light output.
• 5 different settings that include 4 levels of brightness
plus a strobe. Auto memorization for all settings.
• Machined from aircraft grade aluminum. Has type lll
anodized finish.
• Double coated glass lens to give maximum OTF (Out
The Front) for maximum brightness and beam
distance.
• Waterproof to IPX7 standard. Submersible up to 1
meter under water.
DISCLAIMER
• After long periods of use on the highest setting, the
surface area may get hot. Please use caution when
using the flashlight in a constant high brightness level.
It is recommended to let the flashlight cool down to
prevent any injury.
• High intensity light is harmful to human eyes. This
product is not meant to be handled by children under
the age of 18 without adult supervision.
• Use the highest quality, protected-circuit batteries to
insure maximum performance and safety. Consult
with the manufacturer regarding any questions or
concerns.
• PowerTac’s liability is voided if the light is not used in a
proper manner or if modified.
• PowerTac reserves the right to change the design
and/or specifications of all PowerTac products without
prior notice.
• Please do not change batteries at dangerous locations
such as gas stations. Batteries must only be changed
or removed when light is off.
• Do not use or attempt to recharge a disposable CR123
battery! Do not throw the flashlight into a fire as an
explosion may occur.
THE POWERTAC NO-HASSLE LIFETIME WARRANTY
PowerTac warrants our illumination tools to be free from
defects in workmanship and materials, including any
LEDs housed within, for the lifetime of the original parts
(the lifetime of the parts are specified by individual parts
manufacturers). We will repair or replace your original
purchase of these products, at our discretion, if it is
determined by us to be defective. Electronics, chargers,
and rechargeable batteries are covered for a period of
two years with proof of purchase. Normal wear and tear –
including lamps burning out, batteries draining, and
switches wearing out – is not covered, nor is damage
resulting from misuse, abuse, neglect, battery damage,
use of other non-approved batteries or altering these
products from their original state. Parts and accessories
for illumination tools are not covered by this warranty
WARRANTY DISCLAIMER
The above warranty is exclusive, and to the extent
permitted by applicable laws, shall be in lieu of all other
warranties, express or implied, including, without
limitation, any warranty of merchantability or fitness for a
particular use or purpose. PowerTac disclaims any and all
liability for product malfunctions, physical injuries, or
property damages that result in whole, or in part, from
the criminal, negligent, or improper use of the product,
or from modifications or alterations thereto. In no event
shall PowerTac be liable for any incidental, special, or
consequential damages relating to the purchase, use, or
performance of any PowerTac product.
WARRANTY CLAIMS
Please go to www.powertaclights.com/warranty and
follow instructions.
USAGE INSTRUCTIONS
1. To install battery, unscrew tail cap. Insert positive end of the battery
towards LED. Tighten the tail cap till it’s completely closed.
2. To turn the light ON, quickly push the side button to illuminate LED; to
adjust light settings, press and HOLD down side button. The flashlight
will change modes in the following order: Firefly–Low--Medium–High
and back to Firefly. The last setting used will be auto-memorized when
turned off.
3. To charge E10R battery, unseat rubber cap on charge-port. Plug in small
end of supplied USB cord into the flashlight; plug in DC USB attachment
(not supplied) into power source and begin charging. The indicator light
inside side-switch will be red when depleted and will change to blue
when fully charged.
DISTRIBUTED BY:
POWER TAC LIGHTS INC.
Middletown, NY 10941
www.PowerTacLights.com
