Thank you for choosing the Intelligent Digital Battery Charger/Discharger DCN50-II.
You get a rapid charger/discharger that is computerized with a high performance
microprocessor and specialized operating software. It can maintain your battery at its best
condition and also control them safely.
Please read this entire operating manual completely and attentively as it contains a
wide variety of specific programming and safety information.
z
Special features
-High-power and high-performance circuit
DCN50-II employs the circuit that has maximum output power of 50W .As a result it
can charge or discharge up to 12 cells of NiCd/NiMH, 4 series of Li-ion/poly and 6/12V
Lead-acid batteries with maximum current of 2.5A.
- Optimized operating software
When charging or discharging,DCN50-1 has an ‘AUTO’ function that set the charging
voltage automatically for NiMH/NiCd batteries
，
it can prevent from over-charging can lead
to an explosion by users fault. Every program in the unit is controlled with mutual links and
communicates for every possible error so it introduces a maximum safety. These can be
set at users option.
- Maximum safety
Delta-peak sensitivity: The automatic charge termination program works on the
principle of the Delta-peak voltage detection. The charge monitors the voltage curve and
assessment of the peak with the charging time increment. This indicates the terminal point
of charging accurately.
Input power monitor: To protect the car battery using as input power from being
damaged the voltage of it always monitored. If it drops below the lower limit the process
will be ended automatically.
Fault condition protection: This device will not start operating when “battery polarity
reverse”, “battery wire opened” and “battery or terminals shorted”.
z
Exterior of the unit
DC Iput
Operating
Buttons
Connect
Battery
Terminals
