Powerstar Inc.
3
Section 1
SAFETY INFORMATION
The Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags,
and surges from reaching your computer and other valuable electronic equipment. The UPS
filters out small utility line fluctuations and isolates your equipment from large disturbances
by internally disconnecting from the utility line. The UPS provides continuous power from its
internal battery until the utility line returns to safe levels.
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the warranty.
Handling Safety
The UPS requires two people for installation due to its weight. To lighten the UPS, you may
remove the battery while you position it.
This equipment is intended for installation in a temperature-controlled indoor area free of
conductive contaminants.
Electrical Safety
To reduce the risk of fire, connect only to a circuit provided with a 15 Amp maximum
branch circuit over current protection in accordance with the National Electrical Code
ANSI/NFPA or country specific electrical code.
Do not work alone under hazardous conditions.
Check that the power cord(s), plug(s), and sockets are in good condition.
To reduce the risk of electric shock when grounding, disconnect the equipment from
the AC power outlet before installing or connecting to other equipment. Reconnect the
power cord only after all connections are made.
Use one hand, whenever possible, to connect or disconnect signal cables to avoid a
possible shock from touching two surfaces with different electrical grounds.
Connect the equipment to a three wire AC outlet (two poles plus ground). The
receptacle must be connected to appropriate branch circuit/mains protection (fuse or
circuit breaker). Connection to any other type of receptacle may result in a shock hazard.
In order to maintain compliance with the EMC directive, output cords attached to the
UPS should not exceed 10 meters in length.
Содержание PS1503
Страница 19: ...Powerstar Inc 19...