powersoft MeMo Скачать руководство пользователя страница 3

MeMo | 3

Important Safety Instructions - Mover

CLASS3

WIRING

PERMANENT MAGNETIC FIELD

External magnetic field: 1.5 mT @ 100 mm from the shell.
Do not use electronic devices and magnetic cards close to the Mover.
Do not place the Mover in proximity to tube TV/Video monitors.
Be careful when using tools around the Mover.
Be careful when handling more than one Mover at a time outside boxes: take Movers at least 80 mm far one 

from each other.

CLASS3

WIRING

VIBRATIONS

System exposes human body to mechanical vibrations

CLASS3

WIRING

DO NOT DROP THE MOVER

Impacts can damage the Mover: warranty will be void if signs of impacts will be detected.

CLASS3

WIRING

USE THE MOVER IN DRY 

ENVIRONMENT

Do not expose the Mover to liquid spray.
Do not immerge the Mover in liquids.

CLASS3

WIRING

DO NOT TRY TO MODIFY THE MOVER 

IN ANY PART

Never try to open or modify the Mover for any reason!
- Risk of serious injury. 
- Risk to damaging the unit.
- Warranty void if open or altered.

CLASS3

WIRING

STORAGE

When not in use, keep the Mover adequately protected, in a dry place. Use its original package to store the 

Mover.

CLASS3

WIRING

AVOID EXCESSIVE HEAT

Do not expose Movers to excessive heat, over than 60 °C (140 F) environmental temperature.
Durability and performances of the units can diminish if they are used in excessive warm environment.

System Specifications

MeMo Amplifier:

Dimensions: L 27.4 cm x W 21.0 cm x H 3.7 cm.

Weight: 2.31 kg.

Peak Power Output: 250 W @ 4 Ohm.

Average Power Output: 40 W @ 4 Ohm.

Signal Processing with sub-harmonics enhancements, optimized for Mover applications.

Preset selector:

• Music preset - Ideal for every multimedia and music content!

• Cinema preset - Ultra-low frequency enhanced for the best movie experience!

• Gaming preset - Dive yourself inside your favorite game and play with the fourth dimension!

Warranty (*): 2 years + 1 after product registration.

(*) Standard Warranty is 2 years. Amplifier warranty will be extended of one year if the product will be registered 

Mover transducer:

Dimensions: 90 mm x 90 mm x 90 mm .

Weight: 2.44 kg.

Piston weight: 1.2 kg.

Magnet type: 0.28 kg Neodymium magnet, grade N50.

Frequency Response: 5 – 500 Hz.

Nominal Impedance: 4 Ohm.

Nominal Bl: 32 Tm

Warranty: 2 years 

For any query reach out to us through our website www.powersoft.com.

Содержание MeMo













Отзывы: