18 : 4.Programming DSP-4
At this stage you should have already initialized your DSP board as a Powersoft model. This includes also some default
presets’ schemes designed by Powersoft, which are intended to represent a good starting point for your evaluation of the
amplifier, for a proper tuning of your speaker and for desired signal processing that you want to apply on your finished product.
The final steps of this chapter will also guide through the process of exporting the presets that you have designed as .pam files.
The exportation of these presets is an essential action if you desire to create a custom model for ArmoníaPlus™. In fact, you
will be asked to import them on following steps.
1. Open ArmoníaPlus™, press the cogwheel in the lower
right-hand corner select the tab “Communication Manager”
on the option menu.
2. Select the Network Card where DSP-4 connected
pressing Play, then press Apply.
3. Close the Option menu by clicking on OK.
4. In the ArmoníaPlus™, go in the Match view and click
on Discovery button. All connected amp modules will be
detected and automatically shown on the amp list in the
Status section.
5. Drag the discovered model onto the workspace and
wait it becomes green (device is on-line)
6. Go in the Select view
Create your custom pre-
sets with ArmoníaPlus
7. Double click on the model
DSP-4 Initialization | 35
