Cyberhawk-200M Installation
-
3 of 22 -
Doc. No: 202-003318-610 Rev A01
OVERVIEW
The
Cyberhawk-200M-xP
is available with 1 to 6 meter ports (‘x’ in XP representing the number of
ports) in two physical sizes. It measures independently per meter port Voltages, Currents, Powers,
Energies and Distortions on electrical networks and logs user selected parameters. The unit is
supplied in two voltage ranges and with independent user configurable 3-phase measurement Ports
for single or three phase applications. It also includes six (6) (1P model)or 12 Digital Inputs (2P
models and higher) for remote contact status, demand synchronization or measurement of pulses
from typically Gas, Water or Utility meters.
A line diagram illustrating a basic system hookup per meter port is illustrated below.
A
N
C
B
G
Branch Circuit
Protection
15 Amps max.
SOURCE
LOAD
CT
Interface
(optional)
`
C
T1
+
CT
1-
CT
2+
C
T2
-
C
T3
+
C
T3
-
G
`
L
1
L
2
L
3
G
N
L1
L2
L3
N
G
CT1+
CT1-
CT2+
CT2-
CT3+
CT3-
5 Amp CTs
H
P
E
V/A
Multifunction Power Meter
H
P
E
V/A
Multifunction Power Meter
It is user programmed for operational characteristics such as Bus Configuration and Voltages,
Interfaces (PTs and CTs) and Data Logging described in the operational manual.
A standard RS485 connection is provided to support remote communication or it may also
incorporate a Powersmiths COMSERVER (optional Ethernet Port with a built in WEB server) that
provides for remote user access to all system data and data logs using only a Java enabled Browser.
Setup can also be facilitated using one of Powersmiths’ propriety setup software tools available from
www.powersmiths.com
under the Cyberhawk-200M selection.
Note: The installation manual is necessarily short and intended to specifically address primarily the
installation of the unit; please refer to the Cyberhawk-200M User’s Manual for full details.
