4
English
UNPACKING AND CONTENT
IMPORTANT
!
Due to modern mass production techniques, it is unlikely the product is
faulty or that a part is missing. If you find anything wrong, do not operate the product until the
parts have been replaced or the fault has been rectified. Failure to do so could result in serious
personal injury.
CONTENTS IN PACKAGE
Description
QTY
Description
QTY
Work light
1
USB Car Adaptor
1
Stand
1
Operator's Manual
1
USB Charging Cable
1
ASSEMBLY & ADJUSTMENT
ATTACHING THE WORK LIGHT HEAD TO THE STAND (FIG 1)
To Install the Work Light Head on the Stand
1. Place the stand (6) on a flat surface.
2. Position the bracket (5) of the work light head against the stand as shown in FIG 1.
3. Use the locking knob (8), flat washer and spring washer to secure the work light head on the stand.
OPERATION
CHARGING THE WORK LIGHT (FIG 1)
This rechargeable work light is shipped with the battery partially charged. Charge the work light after purchase and
before first use by connecting the included USB charging cable to a USB power output, a cellular phone power adaptor
or a laptop USB port for example.
1.
Make sure the work light is off.
2.
Lift the clear cover (13) to expose the charging port (11).
3.
Connect the micro end of the USB charging cable to the charging port.
4.
Connect the USB end of the charging cable to a USB power output (not included).
5.
The charging indicator will be illuminating Flashing Green, indicating charging is in progress.
6.
The charging indicator turns Solid Green when the charging is completed.
NOTE:
A USB car adaptor is included to provide a USB power from a vehicle.
ON/OFF SWITCH (FIG 1)
The work light is equipped with an ON/OFF switch (10). Press the switch once to turn the work light on and press the
switch a second time to turn it off.
NOTE:
The work light is always on its brightest setting when switched on.
CHANGING THE LIGHT MODE (FIG 1)
The work light has 4 light modes: 3 brightness settings and a red-blue strobe for emergency.
To change the light mode, turn on the work light first by press the On/Off button (10). Soft press the On/Off button
without "Click" sound to rotate the light mode: High (100%), Medium (50%), Low (25%) and Red-Blue Strobe.
