PowerSmith MAGLITHION MLMS12C, Руководство оператора

Страница: 2 / 40

2
English
GENERAL SAFETY RULES
WARNiNG:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
WARNiNG:
READ AND UNDERSTAND ALL WARNiNGS, CAUTiONS AND
OPERATiNG iNSTRUCTiONS BEFORE USiNG THiS EQUiPMENT. Failure to follow
all instructions listed below may result in electric shock, fire and/or serious
personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY:
•
Keep your work area clean and well lit
. Cluttered benches and dark areas invite
accidents.
•
Do not operate power tools in explosive atmospheres,
such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
•
Keep bystanders, children, and visitors away while operating a
power tool
. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs in any earthed (grounded) power tools. Double insulated tools are
equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way.
Double insulation eliminates the need for the three wire grounded power cord and grounded
power supply system.
• Do not expose power tools to rain or wet conditions.
Water entering a
power tool will increase the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is grounded.