Powersmart PS76101A, Инструкция по эксплуатации

Страница: 13 / 17

13
MAINTENANCE
WARNING:
In order to avoid personal injury and the risk of fire and electric shock, remove the battery
pack before adjusting, inspecting, or cleaning the blower.
CLEANING
Remove the battery pack.

Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air
vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air vents in
water.

Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic components. Certain household cleaners may cause
damage, and may cause a shock hazard.
BATTERY PACK

Store the battery pack fully charged.

Once the charging light turns green, remove the battery from the charger and disconnect the charger
from the outlet.

Do not store the battery pack on the tool.

After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.
CHARGER MAINTENANCE

Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed
cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, and
do not place the charger in wet conditions.

Unplug the charger when there is no battery pack in it.

Fully charge the batteries before placing them in storage.

Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the
charger in direct sunlight. Recharge at room temperature between 45˚F and 104˚F . If the battery
pack is hot, allow it to cool down before recharging.