Powersmart PS2020, Инструкция по эксплуатации, Страница: 11 / 19

11
OPERATING INSTRUCTION
WARNING: Prior to cleaning, make sure that the high pressure washer is placed safely on
level ground. Wear protective goggles and protective clothing during the cleaning process.
Notes: Release the lever of the trigger gun, the device will switch off again. High pressure
washer remains in the system.
USING THE PRESSURE WASHER
WARNING:
Impurities in the water can damage the high pressure pump and accessories.
All high pressure washer (except hot water system) use the cold water. The suitable water
temperature is 0
℃
to 40
℃
.

Position the washer as CLOSE as possible to the water supply.

The washer must be used on a secure and stable surface in a standing, upright position (Fig.7).

Make sure the unit is switched off before plugging the unit into the power outlet.

Check that the electrical supply voltage and frequency (Volt/Hz) correspond to those specified on the
rating plate. If the power supply is correct, you may now plug the pressure washer into the power
outlet.
NOTE: The GFCI may need to be reset when first plugged into the electric outlet. Press the "Reset"
button until the power light indicator on the GFCI illuminates when plugged in (Fig.8).