Powersmart DB7659H-22, Инструкция по эксплуатации

Страница: 17 / 33

17
AUGER AND DRIVE CONTROLS
1. To engage the auger, push back the auger control handle; release to disengage.
2. To engage the drive, pull up on the drive control handle. The machine should start moving in the
direction and speed that the speed control lever is set to.
3. When finished clearing a snow path, release the auger control handle and the drive control handle.
Note:
Release (disengage) the auger and drive control handles before adjusting the drive speed control
lever. Never change the drive speed while your snow thrower is moving, it could damage the drive
mechanism and void the warranty.
DRIVE SPEED CONTROL LEVER
Move the drive speed control lever to the desired speed. There are six
(6) settings: four (4) forward
speeds and two (2) reverse speeds. 1 is the slowest forward speed and
4 is the fastest forward speed. R1 is the slowest reverse speed and R2
is the fastest reverse speed.
Note: There is no neutral drive setting since the drive control
handle must be engaged for movement. Neutral is achieved when
the drive control handle is disengaged.
CHUTE DISCHARGE DIRECTION ADJUSTMENT
WARNING - Never direct the snow discharge chute at the operator, bystanders, vehicles or
nearby windows. Discharged snow and foreign objects accidentally picked up by the Snow
Thrower can cause serious damage and severe bodily injury. Always point the discharge
chute in the opposite direction from potential hazards. The discharge chute can be adjusted 180º by
rotating the chute rotation handle. Rotate the chute rotation handle clockwise to move the discharge chute
to the left; counterclockwise to move the chute to the right.
Drive Control Handle
Auger Control Handle
Speed Control Lever