16
WARNING!
DO NOT USE YOUR HANDS TO UNCLOG CHUTE. Stop the motor before
removing debris. Use the supplied clean out tool to unclog the chute. Do not walk in front of your running
Snow Thrower. Do not direct discharged snow towards bystanders.
•
Do not apply additional man-made load to the engine since this may damage the engine.
•
Some parts of your Snow Thrower may freeze under extreme temperature conditions. Do not attempt
to operate your Snow Thrower with frozen parts. If the parts freeze while your Snow Thrower is in
use, stop your Snow Thrower and inspect it for frozen parts. Thaw all parts before restarting and
operating your Snow Thrower. Never force parts or controls that have frozen. Never use an open
flame of any sort to thaw frozen parts.
Pre-Operation Inspection - IMPORTANT!!!
Before using your Snow Thrower for the first time, check the following:
•
Have you read and followed all setup and operation procedures for the engine as outlined in the
ENGINE manual?
•
Has the engine been filled with oil and gasoline to the proper level?
•
Are all snow thrower components properly attached and assembled?
•
Are there any broken or damaged parts?
•
Are all fasteners tight?
•
Are the tires inflated to the proper pressure?
NOTICE:
If you are unsure about the assembly or condition of any of your Snow Thrower parts, please
call our customer service department at (800)791 9458.
AUGER AND DRIVE CONTROLS
1.
To engage the auger, press down on the auger control handle (left side handle).
2.
To engage the drive, press down on the drive control handle (right side handle). The machine should
start moving in the direction and speed that the speed control lever is set to.
3.
When finished clearing a snow path, release the auger control handle and the drive control handle.
Attention:
Release (disengage) the auger and drive control handles before adjusting the drive speed
control lever. Never change the drive speed while your snow thrower is moving, it could damage the
drive mechanism and void the warranty.
Auger handle
Drive handle
L
R
Содержание DB7651-24
Страница 2: ...2 ...
Страница 29: ...29 Frame Assembly All Parts Number Begin with F ...
Страница 31: ...31 Auger Housing Assembly All Parts Number Begin with H ...