Powersmart DB7006 Скачать руководство пользователя страница 5

5

TRAINING

Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to
assemble and operate. Keep this manual in a safe place for future and regular reference.

Be familiar with all controls and their proper operation. Know how to stop the machine and disengage
them quickly.

Never allow children under 14 years of age to operate this machine. Children 14 and over should read
and understand the instructions and safe operation practices in this manual and on the machine and be
trained and supervised by an adult.

Never allow adults to operate this machine without proper instruction.

Thrown objects can cause serious personal injury. Plan your snow-throwing pattern to avoid
discharge of material toward roads, bystanders and the like.

Keep bystanders, pets and children at least 75 feet from the machine while it is in operation. Stop
machine if anyone enters the area.

Exercise caution to avoid slipping or falling, especially when operating in reverse.

PREPARATION

Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds,
boards, wires, branches and other foreign object, which could be tripped over or thrown by the auger
/impeller.

Always wear safety glasses or eye shields during operation and while performing an adjustment or
repair to protect your eyes, thrown objects which ricochet can cause serious injury to the eyes.

Do not operate without wearing adequate winter outer garments. Do not wear jewelry, long scarves or
other loose clothing, which could become entangled in moving parts, wear footwear which will
improve footing on slippery surfaces.

Disengage all control levers before starting the engine.

Never attempt to make any adjustments while engine is running, except where specifically
recommended in the operator's manual.

Let engine and machine adjust to outdoor temperature before starting to clear snow.

PERSONAL SAFETY

Engine exhaust, and certain vehicle components contain or emit chemicals known to cause cancer,
birth defects or other reproductive harm.

Read, understand and follow all instructions on your Snow Thrower and in this Operator's Manual
before attempting to assemble and operate your machine.

Keep this manual in a safe place for future and regular reference. If replacement parts are needed,
refer to the manual.

Stay alert, watch what you are doing and use common sense when operating your Snow Thrower.

Do not use your Snow Thrower while you are tired or under the influence of drugs, alcohol,
medication. A moment of inattention while operating the Snow Thrower may result in severe bodily
injury.

Содержание DB7006
























Отзывы: