Powersmart 97802, Инструкция по эксплуатации

Страница: 10 / 19

10
ASSEMBLY INSTRUCTION
WARNING:
Do not use this product if any parts on the packing list are already assembled to your product
when you unpack it. Parts on this list are not assembled to the product by the manufacturer
and require customer installation. Use of a product that may have been improperly assembled
could result in serious personal injury.
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with
this product. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
INSTALLING THE AUXILIARY GUIDE
Loosen the 2 screw and insert the auxiliary guide(1 )to the base
plate(3).Finally, install the screw again. If you want to cut the wood
that is 3mm wide, release the screw on the base plate and from left side
insert the rip guide that number is 3 (See fig.2)
INSTALLING/ REMOVING THE BLADE
Installing the blade
1.Check if the saw blade faces forward, and press the tool opener to its original position.
2.Install the saw blade into its original position (See fig.3 and fig.4).
3.Make sure that the blade is securely held in place by trying to pull it out.
WARNING:
Do not open the tool opener excessively, or it may cause tool
damage.
Fig.2
Fig.3
Fig.4