ENGLISH INSTRUCTIONS
Warranty
The Seller warrants that the equipment manufactured by it and cover
ed by this order
or contract is free fr
om defects in material and workmanship and, without charge,
equ
ipmen
t fo
und
to b
e de
fec
tive
in
mate
rial
or
work
mansh
ip w
ill b
e re
paired
, or
at
Seller’s option r
eplaced F .O.B. original point of shipment, if written notice of failur
e is
received by Seller within one (1) year after date of shipment (unless specifically noted
elsewhere), pr
ovided said equipment has been properly installed, operated in accor
-
dance with the Seller’s instructions, and pr
ovided such defects are not due to abuse or
decomposition by chemical or galvanic action. THIS EXPRESS W
ARRANTY IS IN LIEU
OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENT
A-
TIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MER
-
CHANTABILITY
OR OF FITNESS
FOR A PAR
TICULAR PURPOSE.
The
Seller assumes
no responsibility for r
epairs made on the Seller’s equipment unless done by the Seller’
s
authorized personnel, or by written authority fr
om the Seller. The Seller
makes no guar-
antee with respect to material not manufactur
ed by it.
Garantía
El Vendedor garantiza que los equipos fabricados por él y cubiertos por esta or
den o
contrato están libres de defectos en los materiales y mano de obra y que los equipos
con materiales
o mano
de obra
defectuosos serán
reparados
sin car
go o,
a opción
del
Vendedor
, reemplazados F
.O.B. en el punto original de envío, si el Vendedor r
ecibe una
notificación por escrito de falla en el lapso de un (1) año después de la fecha de envío
(a menos que se especifique en otra parte), siempre y cuando dichos equipos
hayan
sido correctamente instalados y utilizados de conformidad con las instrucciones del
Vendedor
, y siempre que dichos
defectos no se deban a maltrato o descomposición
por acción química o galvánica. ESTA GARANTÍA EXPRESA REEMPLAZA Y EXCLUYE
CUALQUIER OTRA GARANTÍA, GARANTÍA GRATUIT
A O PROMESA, EXPRESAS O
IMPLÍCITAS. NO EXISTEN GARANTÍAS IMPLÍCIT
AS DE COMERCIALIZACIÓN O DE
IDONEIDAD PARA UN PROPÓSITO
EN PAR
TICULAR. El V
endedor no asume ninguna
responsabilidad por las r
eparaciones hechas a los equipos del Vendedor salvo que
se realicen por personal autorizado por el V
endedor o con autorización escrita del
Vendedor
. El Vendedor no otor
ga ninguna garantía con respecto a los materiales no
fabricados por él.
Garantie
Le vendeur
garantit que
l'équipement fabriqué
par lui
et couvert
en vertu
de cette
commande ou de ce contrat est exempt de vices de matériau et de fabrication
et, dans
l'éventualité ou
de tels
vices de
matériau ou
de fabrication
se manifes
-
teraient, il sera répar
é sans frais ou, à la discrétion du vendeur
, remplacé franco
à bord (F
AB) de son point d'expédition d'origine (sauf si spécifié ailleurs), pourvu
que ledit équipement ait été installé correctement et utilisé conformément aux
instructions du
vendeur et,
pourvu que de
tels vices ne
soient pas
le résultat
d’une
utilisation abusive
ou d'une
décomposition découlant
d'une réaction
chimique ou
galvanique. LA PRÉSENTE GARANTIE EST EXPRESSE, REMPLACE ET EXCLUT
TOUTE AUTRE GARANTIE OU REPRÉSENTATION EXPRESSE OU IMPLICITE.
IL N’EXISTE AUCUNE GARANTIE TACITE DE QUALITÉ MARCHANDE OU
D’ADAPTATION À UN BUT P
ARTICULIER. Le vendeur n’assume aucune r
espon-
sabilité pour des réparations ef
fectuées sur son équipement à moins qu'elles aient
été effectuées par du personnel autorisé par lui ou par une autorisation écrite de
lui. Le vendeur n’offr
e aucune garantie pour les matériaux non fabriqués par lui.
USA:
T: (800) 669-5430 • F: (847) 229-0526 • PowersControls.com
Canada:
T: (905) 332-4090 • F: (905) 332-7068 • PowersControls.ca
Latin America:
T: (52) 81-1001-8600 • F: (52) 81-8000-7091 • PowersControls.com
IS-P-LM495 1645
EDP# 6511208
© 2016 Powers
Estados Unidos:
T: (800) 669-5430 • F: (847) 229-0526 • PowersControls.com
Canadá:
T: (905) 332-4090 • F: (905) 332-7068 • PowersControls.ca
Latinoamérica:
T: (52) 81-1001-8600 • F: (52) 81-8000-7091 • PowersControls.com
S-P-LM495 1645
EDP# 6511208
© 2016 Powers
É.-U. :
T: (800) 669-5430 • F: (847) 229-0526 • PowersControls.com
Canada :
T: (905) 332-4090 • F: (905) 332-7068 • PowersControls.ca
Amérique latine :
T: (52) 81-1001-8600 • F: (52) 81-8000-7091 • PowersControls.com
IS-P-LM495 1645
EDP# 6511208
© 2016 Powers
NOTICE
Flush all pipes thoroughly before installation. Installation and field adjustment are the responsi-
bility of the installer.
Installation Instructions
1. Locate suitable place for the tempering valve. Valves should be accessible for service and
adjustment, and be as close to the point of use as possible.
2. Bleed pressure from the system.
3. Route copper tubing or piping to fit valve dimensions.
4. For valves with Quick-Connect tailpieces refer to “Quick-Connect Installation” instructions
below.
5. Remove tailpieces from the valve and make sure union nuts are over the tubing/piping before
connecting to the
tailpiece.
NOTICE
If soldering, remove
unions and gaskets
from valve body prior
to soldering to prevent
damage to valve from
excessive heat.
6. Flush piping again,
install valve using
filter gasket on
hot and cold water
inlets and fiber
gasket on mixed
water outlet.
7. Turn on the cold
and hot water.
If any leaks are
observed, tighten
connections as
necessary to stop
leak before pro-
ceeding.
Troubleshooting
Fluctuating or erratic hot water temperature at fixture:
Unbalanced Pressure. Install balancing or throttling valve at the hot and cold
water supplies and adjust accordingly for demand.
Hot water backing up into cold water line:
Hot water pressure is higher than cold water pressure. Examine check valves for
dirt & debris, clean as necessary.
Cannot adjust water temperature to desired temperature:
Install balancing or throttling valve at the hot and cold water
supplies and adjust accordingly for demand.
High pressure drop through the tempering valve:
Valve undersized. Install larger thermostatic tempering valve.
Insufficient hot water during peak demand:
Check flow requirement during peak demand period. Use larger thermostatic tem-
pering valve.
Series LFLM495
HydroGuard
®
Thermostatic Tempering Valves
Válvulas termostáticas de mezclado
Vannes thermostatiques
IS-P-LM495
To Adjust Temperature (Figure 3)
1. Let the water flow for at least two minutes to
allow supply temperature to stabilize.
2. Place a thermometer in the outlet water
stream.
3. Loosen handle screw with hex wrench.
4. Handle must be lifted 1⁄4” to adjust tempera-
ture. Rotate handle clockwise to decrease
temperature and counter-clockwise to
increase the temperature.
5. Lower handle and tighten screw.
6. Check for outlet temperature.
NOTICE
Pressure Differential between Hot & Cold Water Supplies
must be less then 25%.
NOTICE
It is recommended that shutoff valve(s) be installed on the inlet(s) to facilitate service of
the LFLM495 valve.
Local building or plumbing codes may require modifications to the information
provided. You are required to consult the local building and plumbing codes prior to
installation. If the information provided here is not consistent with local building or
plumbing codes, the local codes should be followed. This product must be installed by
a licensed contractor in accordance with local codes and ordinances.
WARNING
WARNING
!
WARNING
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information can result
in death, serious personal injury, property damage, or damage to the
equipment.
Keep this Manual for future reference.
WARNING
!
Need for Periodic Inspection and Yearly Maintenance:
Periodic inspection and
yearly maintenance by a licensed contractor is required. Corrosive water condi-
tions, temperatures over 200°F, unauthorized adjustments or repair could render
the valve ineffective for service intended. Regular checking and cleaning of the
valve’s internal components and check stops helps assure maximum life and proper
product function. Frequency of cleaning and inspection depends upon local water
conditions.
WARNING
!
FAILURE TO COMPLY WITH PROPER INSTALLATION AND MAINTENANCE
INSTRUCTIONS COULD CONTRIBUTE TO THE VALVE FAILURE, RESULTING IN
INJURY AND/OR DEATH.
TO ENSURE THE ACCURATE AND RELIABLE OPERATION OF THIS PRODUCT, IT IS
ESSENTIAL TO:
• Properly design the system to minimize pressure and temperature variations.
• This valve is not factory preset and can be adjusted to deliver scalding tempera-
tures.
Check outlet temperature to ensure it does not exceed 105°F (41°C).
Make sure temperature limit stop is properly re-set to maximum 105°F (41°C)
following valve maintenance or repair. Tampering with limit stop in any way may
result in scalding temperature causing serious bodily harm and/or death.
Installation Instructions • Instrucciones de instalación • Instructions d’installation
WARNING:
This product contains chemicals known to the
State of California to cause cancer and birth defects or
other reproductive harm.
For more information: Watts.com/prop65
ADVERTENCIA:
Este producto contiene sustancias químicas
que en el Estado de California se conocen como causantes de
cáncer y malformaciones u otros daños reproductivos.
Para más información: W
atts.com/prop65
AVER
TISSEMENT :
Ce produit contient des produits chimiques
reconnus par l’État de Californie comme étant cancérigènes et
pouvant provoquer des anomalies congénitales ou affecter la
capacité de reproduction.
Pour plus d'informations : W
atts.com/prop65
LFLM495-5
LFLM495-1
Advanced Thermal
Activation
Repair Kit
Model
Part #
Description
LFLM495
495 100
Plunger/Motor Assembly
Turn
Hotter
Hex Wrench
Colder
Unscrew, Lift Cap
to Adjust
Figure 3.
Quick-Connect Installation
1. Mark pipe as shown.
This is pipe insertion
depth.
2. Clean pipe end.
To Connect
3. If using PEX tubing,
insert pipe stiffener
(provided) into end
of pipe.
4. Push tubing into tail-
piece up to mark.
5. Insert collet clip.
PEX tubing only
Pipe Stiffener
Tail Piece
Mark
Collet clip
1
1
/
2
in. (38.1mm)
1
3
/
4
in. (44.45mm)
1
7
/
8
in. (47.63mm)
3
/
4
in.Pipe (19.05mm)
1 in.Pipe (25.4mm)
1
/
2
in.Pipe (12.7mm)
1. Remove collet clip.
To Disconnect
2. Depress collet.
3. Pull tubing from tailpiece.
Collet depressed
WARNING
!
For valves with CPVC or PEX end connections, do not exceed the tubing manufacturers pressure and
temperature ratings. Refer to the tubing manufacturers product specifications for that information.
Figure 1.
Typical
ASSE 1069
Application
Cold
Hot
LFLM495
Mixed
COLD WATER
SUPPLY
POWERS SERIES LM495 OR
LFLM495 WITH INTEGRAL
CHECKS AND SCREENS
HOT WATER SUPPLY
Figure 2.
Single/Two
Handle Faucet
Application
