PowerPoint P154CZSS/T, Инструкция по эксплуатации

Страница: 9 / 24

9
 Connect the mains supply cable to the terminal block on the hob using
the colour code
 Secure the cable clamp
 Check the cable terminals for tightness and ensure that the terminal
links are in place, then replace the cover plate and cover screw
Using Your Hob Top
Using the Touch Controls
The controls respond to touch, so you don’t need to apply any pressure. Use
the ball of your finger, not its tip. You will hear a beep each time a touch is
registered. Make sure the controls are always clean and dry.
Before first use, clean the hob surface (see “Cleaning and Care” section).
Switch on one cooking zone at a time for 5 minutes at the maximum setting to
eliminate any smell. Place a saucepan half filled with cold water on each zone
as you burn it off.
To start cooking
After power on, the buzzer beeps once, indicators light up for 1 second then
go out, indicating that the hob is in standby mode.
1. Touch the ON/OFF control; all the indicators will show “-“.
2. Place a pan on the cooking zone that you wish to use.
3. Select a heat setting by touching the”+” or “-“ button. If you don’t choose a