POWXQG7555
EN
Copyright © 2017 VARO
P a g e
|
7
www.varo.com
If the blade stopping device doesn’t work, please contact service centre for help.
Warning: Do not touch rotating blade.
Warning: Refuel in a well ventilated area with the engine stopped.
6 ASSEMBLY
6.1
Folding handle
1.
Fix the lower handlebars into the unit body with bolts, washers and locking knobs (Fig.
1A).
2.
Lift the two locking levers to release the upper handlebars for folding.
3.
Push the locking lever closed to lock the handlebars in the operating position (Fig. 1B).
4.
Adjust the tension by turning the lock nut with a suitable spanner.
5.
Attach the cable-clamp to the position shown and then attach the cable (Fig. 1C, Fig. 1D).
Caution: Traction and starter cables must always be positioned on top of
the cross bar of the push handle. This provides free movement of the
cables on top of the lower section of the push handle, when the handle is
folded. Incorrect mounting of these cables could lead to damaging and/or
straining them, resulting in a malfunction of the machine. In this case the
guaranty is void.
6.2
Adjustment for an appropriate angle (Fig. 2)
1.
Pull the locking lever opening.
2.
Rotating the upper handle centered of the angle adjusting gear for adjusted an
appropriate angle into the scope -20° to 20° as shown in Fig. 2.
3.
Push the locking lever closed to connect the lower handle and the upper handle.
6.3
Mounting and dismounting the grass catcher
1.
To fit: Raise the rear cover and hitch the grass catcher on rear of mower (Fig. 3A) (Fig.
3B).
2.
To remove: grasp and lift rear cover, remove grass catcher.
6.4
Starter handle
1.
Move the starter handle from the engine to the rope guide (Fig. 4A).
6.5
Height of cut
1.
Apply outward pressure to disengage lever from rack. Move lever forward or back to
adjust height. (Fig. 5 and see clause 7.9)
6.6
Toolbox
1.
To fit: press the tool box into the handle panel.
2.
Lock the tool box with the handle panel-the nose on the bottom side of the tool box must
snap into the handle panel. (Fig. 6A, Fig. 6B)
3.
This type of lawn mower have two tool box, one is built-in box, the other is external box,
for the built-in box, you can push the button to open it, and then press the cover to lock it.
You can put tools such as spanner, screwdriver, and also put drinking bottles in these
boxes. (Fig. 6C)
