POWXQ5102
EN
Copyright © 2015 VARO NV
P a g e
|
9
www.varo.com
A diamond cutting wheel is best used to cut hard stone.
It is prohibited to use the machine on asbestos materials!
Never use a grinding disc for cutting!
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power plug.
10.1
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2
Lubrication
The machine does not need any extra lubrication.
10.3
mains cable & plug
If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by a qualified specialist (qualified electrician).
11 TECHNICAL DATA
POWXQ5102
Mains voltage / Mains frequency
230-240 V / 50 Hz
Rated Power:
950W
No load speed
10500 min-1
Max. disc diameter:
115mm
Drive spindle thread:
M 14
Weight (+/-):
2.08 Kg
Insulation class :
/ class II
Double insulated
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
91 dB(A)
Acoustic power level LwA
102 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
aw (Vibration):
10.6 m/s²
K = 1.5 m/s²
13 STORAGE
Thoroughly clean the whole machine and its accessories.
