POWXB20050
EN
Copyright © 2021 VARO
P a g e
|
10
www.varo.com
12 USE
12.1
Grinding
Hold the handle (3) and auxiliary handle (6) firmly and
switch on. Avoid blocking the ventilation slots with your
hand, as this may cause the grinder to overheat. Let the
disc reach full speed. Apply the grinder to the item.
Maximum effect is achieved when the grinder is held at
an angle of 15-30
°
in relation to the item. Move the
grinder gently along the item. Give the grinder time to
work. It is rarely necessary to press the disc hard against the surface to be worked. Sparks
can occur in the motor compartment during use. This is normal and does not mean the grinder
is defective. Switch off the grinder after use.
13 CLEANING AND MAINTENANCE
13.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
14 TECHNICAL DETAILS
Model nr.
POWXB20050
Rotation speed
10 000min-1
Disc diameter
125mm
Rated Voltage
20V
Spindle lock
Yes
Battery connection
Slide-on
Disc bore
22 mm
Soft grip
Yes
Safety guard
Yes
Battery capacity
20V-4000mAh
Charger rating output
20V-2A
15 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
89 dB(A)
Acoustic power level LwA
100 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Max 1,8
m/s²
K = 1,5 m/s²
