POWX900
EN
Copyright © 2016 VARO NV
P a g e
|
2
www.varo.com
ELECTRIC CABLE HOIST
POWX900
1 APPLICATION
This cable hoist is used to hoist and lower loads. It is the ideal tool for interior design hoisting,
construction site loading, repair shop loading and so on.
WARNING! For your own safety, read this manual and general safety
instructions carefully before using the appliance. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1.
Installation brackets
2.
Washer
3.
Mounting Case
4.
Motor Housing
5.
Hook Bracket
6.
Cable spool
7.
Steel cable
8.
Lift limit bracket
9.
Down limit bracket
10. Stopper
11. Spring buffer unit
12. Load Hook
13. Load hook with pulley
14. Remote control
15. Emergency switch
16. Operating switch: Up / Down
17. Power cord
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packing and package inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
Keep the packing materials as long as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
2 Installation brackets
1 Load pulley hook
4 Hexagon head screws
4 Washers
4 Spring lock washers
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the tool.
Read manual before use.
In accordance with essential
safety standards of applicable
European directives.
Wear gloves
