POWEG9011
EN
Copyright © 2017 VARO
P a g e
|
5
www.varo.com
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool.
Distractions can cause you to lose control of it.
5.2
Electrical safety
Always check that the power supply corresponds to the voltage on
the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use adapter plugs with earthed power tools. Unmodified plugs and matching outlets
will reduce the risk of an electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges
and refrigerators. There is an increased risk of an electric shock if your body is
earthed.
Do not expose power tools to rain or wet conditions. If water gets inside a power tool,
it will increase the risk of an electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep the cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of an electric shock. If a retractable
cord is used, the cord should be fully reeled out to avoid heating up.
If operating a power tool in a damp location is unavoidable, use a power supply
protected by a residual current device (RCD). Using an RCD reduces the risk of an
electric shock.
5.3
Personal safety
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool when you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention when operating a power tool
may result in serious personal injury.
Use safety equipment. Always wear eye protection. Using safety equipment such as
a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is
needed will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the
plug. Carrying power tools with your finger on the switch or plugging in power tools
when the switch is in the on position makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner
or key left attached to a rotating part of the power tool may result in personal injury.
Do not reach out too far. Keep your feet firmly on the ground at all times. This will
enable you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
If there are devices for connecting dust extraction and collection facilities, please
ensure that they are attached and used correctly. Using such devices can reduce
dust-related hazards.