POWDPG75380
EN
Copyright © 2021 VARO
P a g e
|
9
www.varo.com
11 CLEANING AND MAINTENANCE
▪
Check your machine regularly before starting the work.
▪
Damaged cutting blades have to be repaired or exchanged by a qualified service man
before working with the machine
▪
After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
▪
Always keep the ventilation slots in motor housing clean
▪
Never clean or spray a machine with water .clean the motor housing only with a moist
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine. Finally, dry the motor housing carefully.
▪
Store the machine with the supplied protection cover.
▪
Only use original accessories and spare parts.
12 TECHNICAL DATA
Type
POWDPG75380
Voltage
40V
Blade length
600 mm
Cutting length
510 mm
Cutting capacity
20 mm
No load speed
1400 /min
Telescopic length
2.1m to 2.8m
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
77 dB(A)
Acoustic power level LwA
91 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
aw (Vibration)
1,3 m/s²
K = 1,5 m/s²
