POWDP20400
EN
Copyright © 2020 VARO
P a g e
|
11
www.varo.com
Note: The amount of actual torque may vary depending on the cleanness
and condition of the threads and other factors. If tightening critical
components, chase threads before assembling components and check the
actual torque applied to the fastener with a mechanical torque wrench (not
supplied).
11 CLEANING AND MAINTENANCE
11.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11.2
Maintenance
▪
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
12 TECHNICAL DETAILS
Model nr.
POWDP20400
Rated voltage (direct current)
40 V
Rotation speed
0-2000 min-1
Impact rate
0-3300 ipm
Socket type
1/2”
Max. torque
350 Nm
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
87 dB(A)
Acoustic power level LwA
98 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
4,0 m/s²
K = 1.5 m/s²
