BATTERY INFORMATION
Adult Installation Required
1. Open the battery compartment door
on the bottom of the unit by removing
the screws with a screwdriver (not
included) and lift up.
2. Insert 4 “AA” size batteries (included)
following the polarity marked inside
the battery compartment.
3. Replace the battery compartment door and the screws.
4. Using a screwdriver, close door.
BATTERY PRECAUTIONS:
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g., Alkaline and Carbon-zinc) or old
batteries with fresh ones.
4. If the batteries in the device are weak/dead or the device is not to be used for a long period
of time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer’s directions.)
6. Do not dispose of batteries in a fire; batteries may leak or explode.
•
Rechargeable batteries are to be removed from the toy before being charged,
•
Rechargeable batteries are only to be charged under adult supervision,
•
The supply terminals are not to be short-circuited.
AC ADAPTER:
To operate the unit using AC power, connect an AC/DC adapter with DC 6V, 300mA (not
included)
to the unit. Plug the small end into the DC 6V Jack on the bottom of the unit
and connect the other end into the AC outlet. The batteries are automatically disconnected
when the AC adapter is used.
CAUTION:
Using an AC adapter that does not have the recommended rating may damage the unit. When
not using AC power, disconnect the AC adapter from the wall outlet by pulling the plug (not
the cord).
2
