Warnings
s
ATTENTION :
Read this booklet carefully as it contains important instructions for a safe installation,
use and maintenance.
Important instructions to be kept for future reference.
The following basic precautions should always be followed when using electrical
appliances:
1.
Read all instructions before using the Adapter.
The Adapter
2.
This Adapter must be used only for the purpose it was expressly designed; any
use NOT complying with the instructions contained in the manual is considered
inappropriate and dangerous. The manufacturer is NOT responsible for possible
damages caused by the inappropriate and/or unreasonable use.
3.
The installation of the Adapter will be made in accordance with the indications of
the manufacturer. A wrong procedure may cause damages to persons, animals or
objects, for which the manufacturer cannot be considered responsible.
4.
Before use, check the integrity of the Adapter. DO NOT operate the Adapter when
it is damaged. In case you are not sure, contact a qualified person. If the device is
damaged, it must be replaced by the manufacturer or its service agent or a
qualified technician in order to avoid a shock hazard.
5.
Before powering the Adapter make sure the rating (voltage and frequency)
corresponding to the grid and the socket is suitable for the plug of the device, and
that the wall socket is properly grounded. This device is fitted with an earth wire
for extra safety.
6.
Check the Adapter's wattage rating, which is the amount of electricity it can safely
transmit per second, and is provided either in watts or in amps and volts. (Multiply
the amps and volts together to get the wattage rating.) The wattage rating must
be greater than the appliance’s power requirement. If you plan to plug multiple
appliances into the Adapter, add their wattages together to make sure the total
DOES NOT exceed the Adapter's wattage rating.
7.
DO NOT attempt to connect multiple Adapters, or plug an Adapter into an
Extension Socket, or vice versa. This mistake can lead to fires, equipment failures
and electrocution. Plugging two Adapters or A Extension Socket together
reduces their current capacity which will result in voltage drop and overheating.
8.
The Adapter must NOT be switched on using external timers and/or other remote
control appliances which are not specified in this manual.
9.
Only use original components & accessories provided by the manufacturer. Any
non-original component or accessory NOT recommended by the manufacturer
