PowerPac PPV3200, Руководство пользователя

Страница: 12 / 24

a. Switch the power on and press the “Start/Pause” button on the
Remote Control or the “Start/Pause AUTO” button on the
appliance.
b. When the appliance works normally, the orange backlit illumination
of the “Start/Pause” button will be constant.
c. On pressing the “Start/Pause” button, the appliance stops moving.
Upon pressing the “Start/Pause” button again within 20 – 25
seconds
, the appliance resumes movement. If not, the appliance
enters the Sleep mode.
Note

Please switch off the Power switch and DO NOT leave the
appliance on Standby mode for long intervals of time

DO NOT operate the appliance while it is being charged
3. “AUTO”
In the Operating Mode where the appliance is moving across the
floor and performing “Powerful” or “Edge” vacuuming, pressing the
“AUTO” button on the Remote Control returns control of vacuuming
back to the appliance, and it will adjust the type of vacuuming
phase according to the environment of different floors and rooms.
Pressing:

the
“Start/Pause” button on the Remote Control, or

the
“Start/Pause AUTO” button on the appliance,
stops the appliance from operating.
In the Standby Mode where the appliance is stationary, pressing:

the
“Start/Pause” button on the Remote Control, or

the
“Start/Pause AUTO” button on the appliance,
starts the vacuuming process, with the appliance assuming control
and it will adjust the type of vacuuming phase according to the
environment of different floors and rooms.