![PowerNet HomePNA 3.0 Скачать руководство пользователя страница 98](http://html1.mh-extra.com/html/powernet/homepna-3-0/homepna-3-0_user-manual_1590523098.webp)
HomePNA 3.0 with 802.11g ADSL2+ Firewall Router
Chapter 4: Configuration
97
IGMP
IGMP, known as
Internet Group Management Protocol
, is used to management hosts from
multicast group.
IGMP Forwarding:
Accepting multicast packet. Default is set to
Enable.
IGMP Snooping:
Allowing switched Ethernet to check and make correct forwarding decisions.
Default is set to
Enable
VLAN Bridge
This section allows you to create VLAN group and specify the member.
Edit:
Edit your member ports in selected VLAN group.
Create VLAN:
To create another VLAN group.
Advanced VLAN Setup Example (Triply Play)
VLAN_data:
Ethernet Port 1, Wireless and Wireless WDS are reserving for Internet
- On Ethernet port 1 I also need VC 0/40 bridged.
VLAN_Vedio
Ethernet ports: 2, 3 and 4:
- 0/33 Bi-directional IP
- 0/34 Video
- 0/35 Video
- 0/36 Video Subscriber Services (EPG, EAS, etc.)
- 0/37 Video
- 0/38 Video
- 0/39 Spare
Step 1: Setup Member Ports
Go to
Configuration
à
LAN
à
Bridge Interface.
You can setup member ports for each VLAN group under Bridge Interface section. From the
example, two VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN Port first.
Note:
You should setup each VLAN group with caution. Each Bridge Interface is arranged in this
order.