FLEX POWER ROLLER
2
Powernailers® are constructed in the USA and are made
of the best materials available.
The 15FS Power Rollers speeds up the
installation and requires less eff ort on the
part of the installer.
The 15FS FLEX Power Rollers uses an
adjustable foot and you can fi ne-tune the
nailer height according to diff erent wood
profi les. No need for extra shims and pads!
OPERATION
Read these instructions carefully before you use the Nailer.
The 15FS Flex Power Rollers are recommended for
use on 3/4” to 5/8" Tongue and Groove fl ooring.
The 15FS FLEX POWER ROLLER is designed to
use staple lengths of 2”, 1-3/4”, and 1-1/2”.
To use the 15FS Flex Power Roller, adjust the
FLEX foot to a sample of your fl ooring.
Then, simply place the stapler on the fl oor, pull
stapler back so the 9mm rollers catch the edge
of the fl oor above the tongue, tap the plunger
with the rubber capped mallet end to let the
stapler drive and set the nail at the correct 45
degree angle.
Fastening with the Power Roller is faster and easier.
The stapler is designed to fasten from left-to-right
and aides the installer by guiding the stapler into the
fl ooring as the stapler is rolling along.
Consult the fl ooring manufacturers recommended
nailing schedule and ensure you are nailing over a
proper subfl oor.
See page 3 for instructions on correct FLEX foot
adjustment.
