www.powermaxfitness.net
13
‘STOP’ KEY: Pressing it later. STOP treadmill running.
SPE
ED: ‘+’ this sign to be increase the speed. ‘
-
’ this sign to be decrease the speed. If you press
it over o.5 con or - sign, the speed will be automatic increasing or decreasing.
SPEED 2,6,10,14 No. Show in console.it means fast speed shortcut key.E.G. It can adjust the speed
6KM smoothly.
3. FAST STARTING (MANUAL MODEL)
Pls following operation step by step.
POWER ON/OFF--------POST SAFE KEY GRSIP-----------START KEY------
SPEED ‘+’ OR ‘
-
’ AND
INCLINE ‘+’ OR ‘
-
’
4. MANUAL MODEL
1. STARTING:1KM/H---------
SPEED ‘+’ OR ‘
-
’ AND INCLINE ‘+’ OR ‘
-
’
2. MODE KEY----------TIME window:15:00 twinkle.
The or - and SPEED + or - can adjust the time. The range of time: 5:00-99:00.
4. Functions of the safety lock:
In any state, if pulling off the safety lock, you may immediately stop the motor running, and then
the time window will display the marks “
------
“, and the buzzer will emit “B1
-B1-
B1” alarm sound.
At this point, except for the shutdown, the any other operations cannot be implemented to the
treadmill, while the safety lock is correctly reinstalled, the treadmill will enter into the standby
mode again, and wait for inputting the command before making the exercise, you should firstly
inspect that whether the treadmill has been loaded the power supply, and then check whether the
safety lock is effective.
If taking place, the abnormal situations during the motion, you may pull off the safety lock, and
then the treadmill will quickly decrease the speed until the stop; while the safety lock is put into
again, this device will be reset to wait for inputting the command.
5. MP3, USB music play function
1. MP3 music play function
The 3.5 audio interfaces with the audio signals should be plugged into MP3 Play Jack, and then
the power amplifier circuit will automatically enlarge the audio signal, so as to output signal to
loudspeaker.
2. USB Music Play Function
U Disk with MP3 files should be plugged into USB Jack, and then the machine will automatically
identify the audio files and play music.
The song should be selected by pressing “Last Song” and “Next Song”, and playing the music
should be started or paused by pressing “Play/Pause” Key. In addition, the volume should be
adjusted by pressing “Volume Increase” and “Volume Decrease” Key.
