14
Running Belt alignment
⚫
Put electric treadmill on the flat ground.
⚫
Make the electric treadmill run at a speed of about 6-8km/h .
⚫
If the running belt is closer to the right, rotate the right adjusting bolt with 1/2 turn
clockwise, then rotate the left adjusting bolt with 1/2 turn counter-clockwise. (Picture B)
⚫
If the running belt is closer to the left, rotate the left adjusting bolt with 1/2 turn
clockwise, then rotate the right adjusting bolt with 1/2 turn counter-clockwise. (Picture
A)
Picture A Picture B
Multi-wedge Belt Tension Adjusting
When you use the treadmill for a long time, the multi-wedge belt becomes loose because of
the abrasion, then you have to do some appropriate adjustment to facilitate the safe use.
Judgment: the feeling of running with the occasional pause phenomenon, which indicating
that the treadmill belt or multi-wedge belt are a little loose and further affirmation need to be
made.
Method of judging which part is loose: Remove the four screws on protective cover, make the
treadmill run at a speed of 1 km/h, and then stand on the running belt, grip the armrests, and
tread the treadmill belt slightly.( we advise treading the treadmill belts with the user's own
weight)
A.
The instantaneous step can not stop the belt, the tightness is appropriate.
B.
If your instantaneous step stops the running belt, but the multi-wedge belt and former
roller is still runing, it indicates that the running belt is loose and appropriate adjustments
must be made to facilitate the safe use
C.
If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt
stop, but the motor is still running, it indicates that the multi-wedge belt is loose and
appropriate adjustments must be made to facilitate the the safe use
Step 2
:Use a wrench to adjust the screws on the motor base according the the condition.
Meanwhile, gently flip the multi-wedge belt between the motor shaft and the front roller, if it
is too loose, you can flip the multi-wedge belt by 100%; if it is too tight, the degree for you to
flip the belt is very limited. It is appropriate to flip the multi-wedge belt by 80% after
adjustment. Please adjust the tightness of the multi-wedge belt into the state that it could be
flipped by 80%.
Step 3
: Finally lock the motor base,and install the front cover.
