PowerMax Shockwave 241-0959, Руководство пользователя, Страница: 21 / 27

21
USING THE SCRAPER BLADE
1. Install the scraper blade on the multi-
tool as outlined in Fig. 2 on Pages 12
& 13.
2. Set the speed control wheel to #4 and
turn the switch ON as outlined in
Fig. 7 on Page 14.
When using the scraper blade to scrape
old finishes or glue from a workpiece,
place the under side of the blade flat on
the workpiece surface and then lift upward
on the rear of the tool to allow the blade to
form a very slight angle with the workpiece
surface. Feed the blade slowly into the
material that is to be removed. Do not
force the tool as slower travel speeds will
produce better cutting action and reduce
the risk of gouging the workpiece.
When using the scraper blade to cut
carpet, place a scrap workpiece under the
carpet where the cut is being made. Set
the speed to #6, turn the tool so the
scraper blade is at right angles
(perpendicular) to the carpet and then feed
the blade into the carpet.
ASSEMBLY AND OPERATING