PowerMax ROUGH-RIDER 700 UTV, Руководство по обслуживанию

Страница: 11 / 124

11
Select lever safety
system cable
●
Check operation.
●
Adjust if necessary.
○ ○ ○
V-belt*
●
Check operation.
●
Check for cracks or damage.
○ ○ ○ ○
Wheel
●
Check balance/damage/
●
Repair if necessary.
○ ○ ○ ○
Wheel bearing*
●
Check bearing assemblies for loose/
Damage.
●
Replace if necessary.
○ ○ ○ ○
Front and rear
suspension*
●
Check operation.
●
Correct if necessary.
○ ○
Steering system*
●
Check operation./Replace if damaged
●
Check toe-in. /Adjust if necessary.
○ ○ ○ ○ ○
Drive shaft universal
joint*
●
Lubricate with lithium–soap–based
grease.
○ ○ ○
Axle boots*
●
Check operation.
●
Replace if damaged.
○ ○ ○ ○ ○
Fittings and
fasteners*
●
Check all chassis fittings and fasteners.
●
Correct if necessary.
○ ○ ○ ○ ○
Lights and
switches*
●
Check operation.
●
Adjust headlight beams.
○ ○ ○ ○ ○
Engine
2. Inspection and adjustment of engine
2.1
Inspection of cylinder head, intake
And exhaust valve
Preheat the engine, then misfire and unplug the spark plug.
Fix pressure gauge into the hole, open the choke and throttle
handle, and start for 4-6 times.
Note: Giving a leakage check to the pressure gauge.
Rotate the engine until the pressure gauge stop rising.
The maximum reading would be greater than 0.7-0.9Mpa