PowerMax MFT-410, Руководство пользователя

Страница: 13 / 13

www.powermaxfitness.net 13
4. RUNNING BELT TENSION ADJUSTMENT: When you place your foot on the belt, if you can
feel a slipping sensation, then the belt has stretched and is slipping across the rollers. This is a
normal and common adjustment on any treadmill. To eliminate this slipping, turn both Allen bolts
on the rear roller 1/4 turn as below shown. Try the treadmill again to check for slipping. Repeat if
necessary, but never turn the roller bolts more than 1/4 turn at a time.
5. LUBRICATING THE DECK:
A well lubricated deck will ensure high performance of your treadmill
and reduce the level of normal wear and tear to important components. This treadmill has been
pre-lubricated at the factory. However, for optimal performance, the running deck may require
periodic lubrication. With average usage (30 minutes workout session 3 times a week), lubricate
with silicon every four to six months. You may adjust the timing of the lubrication based on the
intensity of the treadmill usage level. Please refer below the picture.
BELT TENSION ADJUSTMENT