Powermatic 54A, Инструкция по эксплуатации и каталог запасных частей

Страница: 7 / 40

7
Introduction
This manual is provided by WMH Tool Group, Inc., covering the safe operation and maintenance
procedures for the Powermatic Model 54A and 54HH Jointers. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. This machine has been designed and constructed to provide years of trouble free operation if
used in accordance with instructions set forth in this manual. If there are any questions or comments,
please contact your local supplier or WMH Tool Group, or visit our web site: www.powermatic.com.
Specifications
Model ................................................................................... 54A..................................................... 54HH
Stock Number:
Jointer and Stand...............................................1791279DXK.............................................. 1791317K
Jointer only.......................................................... 2365013DX.................................................1791317
Table Size (in.) ............................................................ 7-1/4 x 66...............................................7-1/4 x 66
Table support ....................................................dove-tailed ways.................................... dove-tailed ways
Cutterhead Style................................ straight w/ quick-set knives.................................................... helical
Knives ................................................................ 3 double-edged...............................40 four-sided inserts
Cutterhead Speed (RPM) ....................................................6000...................................................... 6000
Cuts per Minute................................................................ 18,000.........................................not applicable
Cutting capacity (in.).......................................................1/2" x 6"................................................. 1/2” x 6”
Blade Size (in.) ..............................................6-1/16" x 3/4 x 5/64................................ 0.10T x 0.59 x 0.59
Switch ...................................................................... push button............................................ push button
Fence size overall (in.)....................................................... 4 x 38.....................................................4 x 38
Fence tilt (degrees).............................................................+/- 45..................................................... +/- 45
Stops.....................................................- 45, 45, and 90 degrees........................ - 45, 45, and 90 degrees
Table Surface Height (in.)..................................................31-1/2.................................................... 31-1/2
Motor.................................. TEFC, 1 HP, 1 PH, 115/230V*, 60Hz..... TEFC, 1 HP, 1 PH, 115/230V*, 60Hz
Overall Dimensions (LxWxH)(in.) ........................66 x 24 x 37-1/2..................................... 66 x 24 x 37-1/2
Jointer Bed Weight (lbs.)........................................................254........................................................ 254
Stand Weight (lbs.) ..................................................................80.......................................................... 80
* (pre-wired 115V)
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.