background image

 

2.0

  Table of contents 

Section     

 

 

 

 

 

 

       

 

 

 

Page 

 

1.0  IMPORTANT SAFETY INSTRUCTIONS ....................................................................................................... 2

 

2.0  Table of contents ............................................................................................................................................ 4

 

3.0  About this manual .......................................................................................................................................... 4

 

4.0  Specifications for PM2200 Cyclone Dust Collector ........................................................................................ 5

 

5.0  Setup and assembly ....................................................................................................................................... 7

 

5.1  Unpacking .................................................................................................................................................. 7

 

5.2  Shipping contents ....................................................................................................................................... 7

 

5.3  Tools required for assembly ....................................................................................................................... 8

 

5.4  Assembly .................................................................................................................................................... 8

 

6.0  Electrical connections .................................................................................................................................. 10

 

6.1  GROUNDING INSTRUCTIONS ............................................................................................................... 10

 

6.2  Extension cords ........................................................................................................................................ 11

 

7.0  Operations .................................................................................................................................................... 11

 

7.1 Start/stop ................................................................................................................................................... 11

 

7.2  Safety Key ................................................................................................................................................ 11

 

7.3 Remote controller ...................................................................................................................................... 11

 

7.4  Dust hose connection ............................................................................................................................... 12

 

7.5  Filter auto clean ........................................................................................................................................ 12

 

8.0  User-maintenance ........................................................................................................................................ 12

 

8.1  Thermal overload reset ............................................................................................................................ 12

 

8.2  Cleaning and bag inspection .................................................................................................................... 12

 

8.3  Motor inspection ....................................................................................................................................... 12

 

8.4  Additional servicing .................................................................................................................................. 12

 

9.0  Consumable parts replacement ................................................................................................................... 13

 

10.0  Troubleshooting PM2200 Cyclone Dust Collector ..................................................................................... 14

 

10.1  Electrical and motor problems ................................................................................................................ 14

 

10.2  Performance problems ........................................................................................................................... 15

 

11.0  Replacement Parts ..................................................................................................................................... 15

 

11.1.1  PM2200 Cyclone Dust Collector – Exploded View .............................................................................. 16

 

11.1.2  PM2200 Cyclone Dust Collector – Parts List ...................................................................................... 17

 

12.0  Electrical Connections for PM2200 Cyclone DC ........................................................................................ 19

 

13.0  Warranty and service ................................................................................................................................. 20

 

 

 

 

3.0

  About this manual 

This manual is provided by Powermatic, covering the safe operation and maintenance procedures for a 
Powermatic Model PM2200HK Cyclone Dust Collector. This manual contains instructions on installation, safety 
precautions, general operating procedures, maintenance instructions and parts breakdown. Your machine has 
been designed and constructed to provide consistent, long-term operation if used in accordance with the 
instructions as set forth in this document.  

This manual is not intended to be an exhaustive guide to dust removal strategies, installation of shop duct work, 
or the use of optional dust collection accessories. Additional knowledge may be obtained from experienced users 
or trade articles. Whatever accepted methods are used, always make personal safety a priority. 

If there are questions or comments about this product, please contact your local supplier or Powermatic. 
Powermatic can also be reached at our web site: www.powermatic.com. 

Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it. 

Register your product using the mail-in card provided, or register online:   http://www.powermatic.com 

 

 

Содержание 1792200HK





















Отзывы: