Sentinel Street LED light kit Instructions
KTM 690/790/1090/1190/1290 Adventure
34491
NOTE:
Use these instructions along with the instructions provided with the Sentinel
Street LED light kit.
NOTE: KTM has two accessory leads. ACC1 = constant power. ACC2 power when key
is on.
Remove the headlight to expose wires. See owners manual for disassembly instructions.
Connect all four of the supplied spade terminals to the four wires on the LED module.
1.) Find the
ACC 2
accessory wires.
Connect the
wire labeled “-“
to the brown
wire and the
wire label “+” to
the other wire.
2.) Find the
right turn signal
wires. Remove
a 1.5” section of
the wire cover.
Connect a
supplied T-tap
to the hot wire
(blk/white). The
white wire
labeled “right”
will connect
here.
3.) Find the left
turn signal
wires. Remove
a 1.5” section of
the wire cover.
Connect a
supplied T-tap
to the hot wire
(purple). The
yellow wire
labeled “left” will
connect here.
Using the instructions provided with the 34491 kit, complete the installation of the Sentinel Street LED
light kit.