1.3 Operating the unit
1.3.1 Turning the unit on
To turn the unit on, press the
Main
Switch (ON/OFF)
. This will supply
power to the unit and activate the
UPS.
1.3.2 Checking the battery level
Once the unit has been turned on (see above), press the small grey
button in the centre of the
Battery Level Indicator
. The top LED will
glow green and the the bars will light up, indicating the approximate
percentage of charge remaining. A flashing bar signifies a charge
percentage between those listed on the interface.
1.3.3 Checking the power usage
Make sure the unit has been turned on and press the small grey
button in the centre of the
Battery Level Indicator
. Once the battery
level has been shown for 5 seconds, the lower LED will glow green
and the bars will indicate the amount of power being drawn.
1.3.4 Using the power outlets
Once the unit has been turned on, power to the power outlets can be
turned on or off using the
AC Power Outlet Switch
.
1.3.5 Using the USB Ports
The
2 Port USB Smart Charger
is rated at 3.1A and is able to supply
3.1A shared between the ports.
DC CHARGE
AC CHARGE
BATTERY LEVEL
POWER USAGE
0%
100%
O
N
/O
F
F
© 2020 Copyright Powerlogic SA (Pty) Ltd
Rev. 2 15/11/2019 BVZ
innovative power technologies
SA (Pty) Ltd.
P - C U B E
User Manual
4
