7
USING YOUR LASER
Setting Up
Power Supply
Operation
‣
Select a place as close as practical to the work site.
Ensure the location is clear of traffic.
‣
Place the laser on a level surface such as a bench or mount.
The S7BL is powered by three AA alkaline batteries.
‣
To turn the unit on turn the power switch to “on” position. Self
levelling will commence and all dot and line beams will appear.
‣
If the unit is outside the self levelling range the unit will not
level causing the speaker to beep and the laser beam to turn off.
‣
Press the dot / line mode button on the control panel to cycle
through the active beams.
