Powerhorse M166113F.2 Скачать руководство пользователя | Manualshive

Страница: 18 / 56

background image

Installation/Initial Set-Up

18

4. Select a Suitable Site

Before using the generator, you must select a suitable

OUTDOOR

location for installation and

operation. This location should meet all of the criteria listed below.

WARNING:

You must choose a suitable site for operating your generator to avoid equipment damage
and/or injury and possible death from carbon monoxide poisoning, electric shock, or fire.
Choose a site that meets all of the criteria specified.

Dry, level
surface

The generator should be positioned on a dry, firm, level surface.

Ensure that the generator sits level and will not slide or shift during operation.
If applicable, block the generator’s wheels to prevent sliding and shifting.

Outdoors only –
dangerous
carbon
monoxide
exhaust

WARNING: Carbon monoxide poisoning hazard

The exhaust from your generator contains carbon monoxide (CO), a
poisonous gas that can kill. You cannot smell it, see it, or taste it.

Carbon monoxide exhaust is given off whether you are using gasoline,
natural gas, or propane as the fuel source to power the generator.

Follow the directions below for choosing a location to operate your
generator in order to avoid carbon monoxide poisoning.

The location you choose to operate the generator must be OUTDOORS
and away from all air intakes

:



Never run the generator inside any closed or semi-enclosed spaces (even if
outdoors), including homes, garages, basements, sheds, or boxes.

These

spaces can trap poisonous gases, even if you run a fan or open windows.



Place the generator so that the exhaust fumes will not be directed towards
people or building air intakes.



Ensure that working, battery-operated or battery back-up carbon monoxide
alarms are used in any dwelling/structure that is in close proximity to the
running generator.



Note that this generator is NOT designed or approved for use in vehicles or
marine applications. Never run the generator inside RVs or other vehicles,
on boats, or on pick-up truck beds.

WARNING:

Never attempt to attach ductwork to the muffler system to allow for
installation inside an enclosure. This could cause hot air deflection,
heat build-up, and increased exhaust back-pressure, resulting in
possible exhaust leakage or damage to the generator.

Adequate
cooling
ventilation

The generator needs adequate, unobstructed flow of air to allow for
proper cooling of engine and generator head.

WARNING:

Heat build-up from inadequate ventilation can result in fire, posing a
serious risk to nearby persons and structures.



Situate so there is adequate clearance around generator to allow for cooling
airflow so that heat does not build up.

«
...
16
17
18
19
20
...
»

Содержание M166113F.2

























































Отзывы:

Нет отзывов

Похожие инструкции для M166113F.2

Бренд: Mase Generators Страницы: 21

SKYLINE HFP3000

Бренд: INE Страницы: 96

Бренд: Whisper Tech Страницы: 98

Бренд: National Instruments Страницы: 36

Бренд: chlorOrgano Страницы: 30

Бренд: Evo Power Страницы: 24

Бренд: Symmetricom Страницы: 470

Бренд: Kubota Страницы: 63

Бренд: Fabco Power Страницы: 13

Бренд: YATO Страницы: 104

Бренд: ABB Страницы: 18

Бренд: NB Страницы: 24

Бренд: nContact Страницы: 79

Бренд: Wavetek Страницы: 77

Бренд: Mase Страницы: 22

Бренд: GeBe Страницы: 28

Бренд: GeBe Страницы: 36

Бренд: feedback Страницы: 53

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды