PowerPallet User Manual
Page
8
of
29
Standard Safety Features
Braking by Handle Position
In Warehouse mode, the PowerPallet applies full braking when the handle moves into the upright
position. There is an optional setting to apply full braking when the PowerPallet handle moves into the
horizontal position.
In the Truck mode, there is an optional setting to apply full brakes when the PowerPallet handle moves
into the horizontal position.
Note: In the Manual mode, braking by handle position is disabled.
Belly-Button
Pressing or bumping against the Belly-Button while the truck is stationary or moving backward stops
current operation, and drives the truck away a few feet from the operator as long as the Belly-Button is
depressed. This feature reduces the possibility of the operator getting pinned by the steering handle.
Parking Brake
The PowerPallet has a safety parking brake on the left side of the unit that can be easily engaged to lock
the PowerPallet motor from driving. This prevents any undesired rolling of the machine.
USB Flash Drive Key (Optional Feature)
The PowerPallet can be programmed to require a USB flash drive as a key before operating the machine.
This feature adds a level of security to client use. This can be achieved by a simple firmware update.
