POWERHANDLING PowerPallet 2000, Руководство пользователя

Страница: 27 / 29

PowerPallet User Manual Page 27 of 29
Firmware Update
The software on the device can be upgraded or reinstalled using a USB flash drive. The update file with
the name
“PHPPPRR.BIN” can be received by contacting Sales & Support . Copy the update file on a 8GB
or smaller USB 2.0 flash drive (formatted to a FAT32 file system), and follow the Firmware & Settings
Update Process .
Acceleration, Brake and Handle Braking Settings Update
The motor acceleration and braking can be changed to achieve the best performance in various
environments. The horizontal handle brake angle can also be set based on user preference. This is
achieved by modifying a text file on a USB flash drive. The text file with the name
“pp_key.txt” can be
received by contacting Sales & Support . The text file will have instructions on how to alter these
settings. Copy the text file on a 8GB or smallerUSB 2.0 flash drive (formatted to a FAT32 file system), and
follow the
Firmware & Settings Update Process .
Note: If the USB Flash Drive Key feature is used, the Firmware & Settings Update Process can be
skipped. Just change the text file “pp_key.txt” on the flash drive to the desired settings and
power up the PowerPallet with the flash drive plugged in.
Firmware & Settings Update Process
1. Make sure the PowerPallet is powered down.
2. Insert the USB flash drive containing the file (
“PHPPPRR.BIN ” for Firmware Update, “pp_key.txt ”
for Acceleration and Brake Settings Update) into the USB programming port on the PowerPallet
User Controller.
3. Press and hold down the Belly-Button for longer than 3 seconds until the Left and Right LEDs
light up YELLOW. Release the Belly-Button once the LEDs light up YELLOW.
4. The Left and Right LEDs will fade from bright YELLOW to dim YELLOW indicating the update
process.
5. If the upgrade is successful, the LEDs will blink GREEN 3 times, and the machine will power
down. Power up the machine to begin operation with the updated firmware.
6. If the upgrade was unsuccessful, the LEDs will blink RED 3 times, and the machine will power
down.
Note: If update process fails, the machine will operate with the existing firmware and settings.