PowerGrip YG-2 Скачать руководство пользователя страница 7

2

7

SAFETY RULES

SAFETY RULES

POWERGRIP  power  console  should  be  connected  directly  to  the 
stationary  grounded  outlet  of  the  power  network.  Do  not  connect 
console  in  parallel  (i.e.  daisy  chain  connection)  to  other  electrical 
devices, such as power supply protection devices, power filters or 
UPS. Do not use extension cords or T-connectors. Non-compliance 
with these requirements may cause injuries or equipment damage, 
which  will  automatically  incur  warranty  termination.  If  you  are  not 
sure which power outlet is duly grounded, consult a competent elec-
trician.

Although POWERGRIP console is intended for considerable current 
surges,  it  is  recommended  to  unplug  the  device  in  case  of  heavy 
thunderstorm. To disconnect the equipment connected to the con-
sole is not necessary.

Avoid water ingress in the console or the housing. In case of water 
ingress  disconnect  the  console  from  the  power  outlet.  Use  the 
device only idoors. Do not use the console in the rooms with high 
humidity.

In case any problems in console operation or its complete damage 
may  occur,  do  not  try  to  remedy  them  unassisted.  It  may  cause 
serious  injuries  or  death.  Do  not  dissemble  the  console.  This  will 
automatically  incur  warranty  termination.  Disconnect  the  console 
from the network immediately and contact autorized . The manufac-
turer is not liable for console functioning and reparation of unauthor-
ized  interference  effects  if  the  maintenance  was  performed  in  an 
uncertified service center.

Содержание YG-2













Отзывы: