PowerGrip YG-1, Руководство по эксплуатации

Страница: 6 / 12

6
APPEARANCE AND CONTROLS
REAR PANEL
9. Letter " L "
indicates the location of the live terminal in a socket
when the proper connection indicator (7) is steadily lit up .
10. Selector switches for permanently energized socket
groups .
Select groups of sockets that will be energized
immediately after the console is plugged into an electrical
mains outlet. These groups will not be deactivated with the
power ON/OFF button. Please note that switching over must
only be done with the power plug pulled out
!
11. Automatic restart selector switch .
When the selector is in
the ON position, in case of the protection tripping, the power
console will restart automatically after two minutes. Please note
that switching over must only be done with the power plug
pulled out
!
12. Circuit breaker is triggered when the maximum permissible
value of absorbed current was exceeded or if there was a short
circuit. When triggered, the circuit breaker button protrudes
from the device housing. To restore the unit operation, you
need to return it to initial position by pushing
.
13. Number of a socket group .
9 10 11 12
13 14 15 16 17