Powergen Falcon Series, Инструкция по эксплуатации

Страница: 6 / 15

I
NSTRUCTIONS
M
ANUAL
F
ALCON
S
ERIES
R
ELEASE
. N.1_M 13_10_08
P
OWERGEN
S.
R
.
L
. V
IA
XXV A
PRILE
, 5 L
OC
. C
ORSALONE
C
HIUSI DELLA
V
ERNA
(A
REZZO
)
)
+39-(0)575-531015 - T39-(0)575-511891 E mail borri@elledi.it
www.batterychargerpowergen.it P.Iva 01572290516 - 6 -
3. MAINTENANCE
q
No scheduled maintenance is provided, though control and cleaning inspections may
be performed within the battery charger system depending on its work environment.
However such operations shall only be carried out by qualified staff.
q
Any maintenance intervention shall only be carried out after disconnecting the rectifier
from mains and from the battery.
q
For a correct operation we recommend to check the mechanical tightening of electric
connections and the good status of wires and connections and to remove the existing
dust.
FRONT PANEL COMMON TO THE FALCON SERIES
Listing the common principal characteristics to the Falcon series :
1. Advanced mosfet technology at high frequency.
2. Charging process entirely controlled by the microprocessor.
3. Visualisation on luminous display of the selected charge curve.
4. Possibility to change the charging curve, select among 16 pre-programmed standard
curves valid for Pb-acid, GEL.
5. Possibility to change battery tension and charge current with buttons on front.
6. Beginning of charge process in «soft start» mode, visualisation of the charging cycle
stage, with the led placed on the front panel.
7. Electronic protection against polarity inversions, short circuits, over tensions and
anomalies.
8. Connection to the battery with potency clamps (Anderson).
9. Alphanumerical signalling of possible anomalies.
10. Thermal protection against over heating.