06
- Ensure that the gas regulator is closed.
- Ensure that the rubber seal (part no. 5) is intact.
- Gas containers may only be changed in a well ventilated location,
preferably outside, away from any sources of ignition, such as
naked flames, ignition flames, electrical devices and away from
other people.
- Never smoke when handling cartridges.
- Fit cartridges in an upright position or on a stable surface.
- To prevent leaks once the cartridge has been perforated
it is
forbidden to unscrew the cartridge holder until the gas has been completely used
up.
USING THE APPLIANCE
- Never use an appliance which is damaged or which leaks.
Never use
the device if the seal is is damaged or worn.
- After fitting a new cartridge to a cold appliance
the shape of the flame
may vary for a short period of time before returning to normal.
- Never leave the appliance running unsupervised.
- Always close the gas regulator after using the appliance.
- Turn off the gas regulator immediately if it performs unusually
during operation.
- It is normal for the bottom of the cartridges to cool down after
prolonged periods of operation.
- CAUTION: Accessible parts may become very hot. Keep young
children away from the appliance.
Remember that when the appliance
is being used its parts heat up and can cause burns. This applies even if the
appliance is only used for short periods of time.
Before removing the cartridge
- Allow the appliance to cool down completely before disassembly,
storage or packing up.
- Ensure that the gas regulator is closed.
- Always keep the appliance in an upright position.
- Disassemble and pack /store the appliance only when it has cooled
down completely.
- Never use the device if the seal is is damaged or worn.
Do not remove
the cartridge until it is completely empty. To remove it, open the gas regulator
slightly, check that no gas escapes and shake the appliance to ensure that the
cartridge contains no liquid.
